Our company is a professional manufacturer of coiling machine. Now we will briefly introduce the maintenance procedures of the coiling machine.
1. Roll the plate according to the parameters specified by the coiling machine.
2. According to the requirements of the machine lubrication diagram, refuel the oil cup lubrication and manual lubrication points as required.
3. After the power is turned on, carry out the lifting movement of the lower roller in the forward and reverse directions and the upper roller to check whether the movement is abnormal or not.
4. Operate strictly according to the processing procedure and operation method of the coiling plate. When the upper roller is lifted to the limit position, it is necessary to pay great attention to the safe operation of the equipment.
5. When the main drive is stopped, the upper roller can be lifted and lowered, and the inverted bearing is tilted and reset.
6. In the course of operation, if irregular noise or impact is found, it should be stopped immediately.
7. Pay attention to the safety of the operation when performing the coiling operation.
8. When lifting the steel plate or reel with the vehicle, be careful not to collide with the machine.
Our company is a manufacturer of coiling machines in the Central Plains. It has decades of experience in rolling, users all over the country, and can be customized according to customer requirements. Excellent product quality and good after-sales service are all praised by users. Welcome to consult and inspect!
