First, mechanical coiling machine, automatic coiling machine before starting preparation
1. Check for any abnormalities in the parts. The fastening screws (caps) must not be loose. The brake should be normal and reliable.
2. Adjust the distance of the reel strictly according to the thickness of the plate, and do not overload the work. It is not possible to roll a workpiece that exceeds the specified range of mechanical properties.
Second, the mechanical coiling machine, automatic winding machine operation notes
1, must be placed in the workpiece, after the position is positive
1. Check for any abnormalities in the parts. The fastening screws (caps) must not be loose. The brake should be normal and reliable.
2. Adjust the distance of the reel strictly according to the thickness of the plate, and do not overload the work. It is not possible to roll a workpiece that exceeds the specified range of mechanical properties.
Second, the mechanical coiling machine, automatic winding machine operation notes
1. The workpiece must be placed in a stable position, and the operation can be started after the position is correct. The signal should be clearly specified and one person should be assigned.
2. The hand should not be placed on the rolled steel plate. It is not allowed to check with the sample. After the shutdown, the sample is used to check the roundness.
3. When the workpiece is not fully rounded, when rolling to the end of the steel plate, a certain amount of allowance should be reserved to prevent the workpiece from falling and hurting people.
4. When working, it is strictly forbidden to stand on the workpiece, and it is not allowed to find the roundness on the rolled cylinder.
5. When rolling a thicker, larger diameter cylinder or a workpiece with a higher material strength, the pneumatic tool should lower the moving roller a small amount and roll it over a plurality of times.
6. When rolling a narrow cylinder, it should be placed in the middle of the roll.
7. After the workpiece enters the roll, the hand and clothes should be prevented from being caught in the roll.
Third, mechanical coiling machine, automatic coiling machine shutdown notice
1. If it is found that the machine is running abnormally, stop it immediately and check the adjustment and repair.
2. Disconnect the switch and cut off the power.
